Shaft Tools Only
A.R.E.’s chrome nickel-plated prop wrench is laser cut from 1/4" steel and is offset for clearance. This wrench will NOT FIT Correct Craft. For Correct...
This wrench WILL FIT Correct Craft. Fits the "Castle Nut" and the 3/4" end fits the A.R.E. Ironman Prop Puller. For ALL OTHERS use Item ARE106 Helps remove the...
A.R.E. Shaft/Strut Bearing Puller The slide hammer design makes quick work of removing single-taper and double-taper drive shafts. Constructed of chrome-plated steel and features a...
1-1/16" Socket with wrench flats. Needed when there is not enough room to get a regular socket/ratchet in between the couplers
1-1/4" Socket With Wrench Flats. Most Mastercraft original equipment driveshaft with Marine Hardware driveshafts.
The Separator is a jacking plug for pushing the shaft out of an A.R.E. System coupling. This nut is included with the ARE Drive Shaft...
This wrench goes in one of the coupling bolt holes and keeps the shaft from turning while loosening the coupling nut. A.R.E.’s coupling wrench keeps...