HOLIDAY SCHEDULE!

WE WILL BE CLOSED THURSDAY AND FRIDAY NOVEMBER 27th & 28th TO CELEBRATE THANKSGIVING AND WILL REOPEN ON MONDAY, DECEMBER 1st.

All orders placed during this time will be processed on Monday, December 1st when we resume our normal business hours.

HAPPY THANKSGIVING FROM THE TEAM AT MY INBOARD MARINE & GOD BLESS YOU!

Strut Bearings

Water-lubricated brass-shelled rubber bearings. A good strut bearing reduces friction, dampens slight vibrations and misalignment, and flushes contaminants through the bearing to avoid abrasion that will mar the shaft surface. These functions are accomplished by having the bearing slightly oversized on the inside diameter, so that a thin film of water rides between the rubber surface and the stainless shaft. The grooved contour of the rubber surface is critical to the flow and
circulation of water around the shaft.
A bearing worn by normal usage should be replaced during service to
maintain that high level of mechanical performance. Poor water lubrication
in the bearing (usually caused by shaft misalignment or too tight a fit with
the shaft) manifests itself in excessive bearing wear, transmission of shaft
whip throughout the boat, and marring of the shaft surface.
When installing the strut bearing, it is important to have a light press
fit between it and the bored casting, and to secure it mechanically with
cup point stainless steel set screws. Be sure, however, not to collapse the
bearing shell when installing the set screws, as it may then bind against
the shaft.
Strut Bushing Set 1 Inch I.D. X 1-1/4 Inch O.D. Brass Bearings SB1.0X1.2 Strut Bushing Set 1 Inch I.D. X 1-1/4 Inch O.D. Brass Bearings SB1.0X1.2
19%
$105.00 $128.95
STRUT BEARING SET 1" I.D. x 1-1/4" O.D. Fits most Ski Nautique, Supra Inboard,  Supra Moomba but not the Vee-Drive. These bearings used to be one...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bushings SB1.1X1.3
20%
$160.00 $199.00
STRUT BEARING SET 1-1/8"I.D. X 1-3/8" O.D. Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the Vee Drive. These bearings...
Strut Bearings Set Glide Marine Vesconite Hilube 1-1/8" X 1-3/8"
11%
$85.00 $95.00
VESCONITE STRUT BEARING SET 1-1/8 I.D. x 1-3/8 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2023 Vesconite...
Strut Bushing Set 1-1/8 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5 Strut Bushing Set 1-1/8 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5
14%
$155.00 $179.95
STRUT BEARING SET 1-1/8" I.D. x 1-1/2" O.D. Fits most Mastercraft with Powerslot 1.5"1 ratio transmission. These bearings used to be one long piece but are...
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/4"
12%
$78.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/4" O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2026 -...
Strut Bearings Set Glide Marine Vesconite Hilube 1-1/8" X 1-1/2"
20%
$79.00 $99.00
VESCONITE STRUT BEARING SET 1-1/8 I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2024 Vesconite...
Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3 Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3
15%
$169.00 $199.95
STRUT BEARING SET 1" I.D. x 1-3/8" O.D. Fits some Malibus, Mastercrafts, Ski Brendella, Ski Centurion's before 1992 when they went to the 1-1/8" shafts....
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/2"
16%
$75.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2025 Vesconite...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
22%
$47.00 $60.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 3.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1" - One Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 2.00" Each Set: Comes with...
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5 Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
15%
$145.00 $169.95
STRUT BEARING SET 1" I.D. x 1-1/2" O.D. Fits some of the late model 1970's & 1980's Mastercrafts with the 1:1 Velvet Drive transmission. These...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
20%
$159.05 $199.00
1-1/8" I.D. x 1-3/8" O.D. MARINE HARDWARE OEM STRUT BEARING SET Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 2.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-3/8" Bearing Length: 2.00" Each Set: Comes with...
Strut Bushing Set 1 Inch I.D. X 1-1/4 Inch O.D. Brass Bearings OEM Marine Hardware
33%
$150.08 $222.40
1" I.D. x 1-1/4" O.D. MARINE HARDWARE OEM STRUT BEARING SET Fits most Ski Nautique, Supra Inboard,  Supra Moomba but not the Vee-Drive. 1" Shaft...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
22%
$50.00 $63.95
GLIDE® STRUT BEARING | BUSHING SET 1" - One Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 3.00" Each Set: Comes with...
Items 1 to 16 of 27 total