PLEASE NOTE - Some products are not immediately available. If your order will be delayed, we will e-mail you or call you and let you know.
E-MAIL US HERE about availability and we will respond quickly! We ship same day if your order was placed by 1:00 PM EST during normal business hours BASED ON AVAILABILITY.
NEXT DAY SHIPPING NOTE - Please see our Shipping Policy SATURDAY OR SUNDAY DELIVERY IS NOT AN OPTION.

WE ARE CLOSED ON MONDAY, MAY 27th IN OBSERVANCE OF MEMORIAL DAY AND WILL RESUME NORMAL BUSINESS HOURS ON TUESDAY, MAY 28th
ALL ORDERS PLACED THIS WEEKEND AND ON MONDAY WILL BE PROCESSED ON TUESDAY, MAY 28th
THANK YOU TO ALL OUR ACTIVE AND RETIRED SERVICE MEN AND WOMEN FOR YOUR CONTINUED SACRIFICE TO KEEP THIS COUNTRY SAFE AND FREE. MAY GOD BLESS YOU ALL!
PLEASE HAVE A SAFE MEMORIAL DAY WEEKEND FROM ALL OF US AT MY INBOARD MARINE!

Strut Bearings

Water-lubricated brass-shelled rubber bearings. A good strut bearing reduces friction, dampens slight vibrations and misalignment, and flushes contaminants through the bearing to avoid abrasion that will mar the shaft surface. These functions are accomplished by having the bearing slightly oversized on the inside diameter, so that a thin film of water rides between the rubber surface and the stainless shaft. The grooved contour of the rubber surface is critical to the flow and
circulation of water around the shaft.
A bearing worn by normal usage should be replaced during service to
maintain that high level of mechanical performance. Poor water lubrication
in the bearing (usually caused by shaft misalignment or too tight a fit with
the shaft) manifests itself in excessive bearing wear, transmission of shaft
whip throughout the boat, and marring of the shaft surface.
When installing the strut bearing, it is important to have a light press
fit between it and the bored casting, and to secure it mechanically with
cup point stainless steel set screws. Be sure, however, not to collapse the
bearing shell when installing the set screws, as it may then bind against
the shaft.
Strut Bushing Set 1 Inch I.D. X 1-1/4 Inch O.D. Brass Bearings SB1.0X1.2 Strut Bushing Set 1 Inch I.D. X 1-1/4 Inch O.D. Brass Bearings SB1.0X1.2
5%
$102.00 $107.00
STRUT BEARING SET 1" I.D. x 1-1/4" O.D. Fits most Ski Nautique, Supra Inboard,  Supra Moomba but not the Vee-Drive. These bearings used to be one...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Marine Hardware Bushings SB1.1X1.3 Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Marine Hardware Bushings SB1.1X1.3
22%
$155.00 $199.00
STRUT BEARING SET 1-1/8"I.D. X 1-3/8" O.D. Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the Vee Drive. These bearings...
Strut Bearings Set Glide Marine Vesconite Hilube 1-1/8" X 1-3/8"
$85.00
VESCONITE STRUT BEARING SET 1-1/8 I.D. x 1-3/8 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2023 Vesconite...
Strut Bushing Set 1-1/8 Inch I.D X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5 Strut Bushing Set 1-1/8 Inch I.D X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5
5%
$144.00 $151.00
STRUT BEARING SET 1-1/8" I.D. x 1-1/2" O.D. Fits most Mastercraft with Powerslot 1.5"1 ratio transmission. These bearings used to be one long piece but are...
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/4"
12%
$78.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/4" O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2026 -...
Strut Bearings Set Glide Marine Vesconite Hilube 1-1/8" X 1-1/2"
24%
$75.00 $99.00
VESCONITE STRUT BEARING SET 1-1/8 I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2024 Vesconite...
Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3 Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3
13%
$99.99 $115.00
STRUT BEARING SET 1" I.D. x 1-3/8" O.D. Fits some Malibus, Mastercrafts, Ski Brendella, Ski Centurion's before 1992 when they went to the 1-1/8" shafts....
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/2"
16%
$75.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2025 Vesconite...
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5 Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
20%
$95.00 $119.00
STRUT BEARING SET 1" I.D. x 1-1/2" O.D. Fits some of the late model 1970's & 1980's Mastercrafts with the 1:1 Velvet Drive transmission. These...
Strut Bushing 1-3/8 Inch I.D. X 2 Inch O.D. Brass Marine Hardware Bushing Strut Bushing 1-3/8 Inch I.D. X 2 Inch O.D. Brass Marine Hardware Bushing
7%
$247.85 $267.88
STRUT BEARING 1-3/8" I.D. x 2" O.D. Marine Hardware One Piece Bearing These bearings are one long piece Bearing length is 5-1/2" long Dogfish 1.375...
Strut Bushing 1-1/4 Inch I.D. X 2.00 Inch O.D. Brass Marine Hardware Bushing
34%
$105.00 $159.95
STRUT BEARING ONE PIECE 1" I.D. x 1.5" O.D. OEM Marine Hardware This bearing is one piece and will replace the 2 Piece SB1.0X1.5 Bearing...
Strut Bushing 1-1/4 Inch I.D. X 2.00 Inch O.D. Brass Morse Bushing
48%
$78.39 $149.88
STRUT BEARING SET 1-1/4" I.D. x 2.00" O.D. 1-1/4 inch x 2 inch x 5 inch brass sleeve bearing provides a wear surface between prop...
Strut Bushing 1-1/4 Inch I.D. X 2.00 Inch O.D. Brass Marine Hardware Bushing
16%
$219.25 $259.55
STRUT BEARING SET 1-1/4" I.D. x 2.00" O.D. These bearings are one long piece Bearing length is 5" long Worn strut bearings increase vibration & causes wear...
Strut Bushing Set 1-1/4 Inch I.D. X 1-3/4 Inch O.D. Brass Marine Hardware Bushings
19%
$209.55 $259.55
STRUT BEARING SET 1-1/4" I.D. x 1-3/4" O.D. These bearings are one long piece Bearing length is 5" long Worn strut bearings increase vibration & causes wear...
Items 1 to 14 of 14 total