Transmission Breather Cap Velvet Drive
- Transmission Breather
- For Velvet Drive 71C and 72C transmissions and V-drives
- Replaces Crusader R034002
- Replaces Pleasurecraft Marine R034002
- Replaces Velvet Drive 4740A
NOTE INSTALL & EXTRACTING THIS ITEM:
We use a 3/8" open end wrench to install this breather. Put your 3/8" open end over the cap.
Then put a 13mm deep well socket over the cap and rest it on the open end wrench that is resting on the hex part of the breather.
GENTLY tap in the breather by tapping on the deep well socket to avoid damaging the rubber disk inside the breather.
To remove it, simply grab it with some pliers and carefully wiggle it out.
Loc-Tite® can be used to help hold it in.
DO NOT BANG on the top of the cap to install this or it will destroy the rubber disk inside.
SEE PICTURES FOR ILLUSTRATION PLEASE