PLEASE NOTE - SOME PRODUCTS ARE NOT IMMEDIATELY AVAILABLE. IF YOUR ORDER WILL BE DELAYED, WE WILL E-MAIL OR CALL YOU AND LET YOU KNOW.
YOU CAN E-MAIL US HERE ABOUT AVAILABILITY AND WE WILL RESPOND QUICKLY!

PLEASE NOTE - - WE WILL BE CLOSED FRIDAY JULY 1st through MONDAY JULY 4th in observance of Independence Day.
Orders received during this time will be processed when we resume normal business hours on Tuesday, July 5th!

HAVE A SAFE HOLIDAY FROM ALL OF US AT MY INBOARD MARINE!

1-1/8" X 5" A.R.E. Inboard Shaft System Splined Inverted Coupler Hurth

$782.00 $995.99

Dual Taper, Pricing Good For Shafts Up To 5' You Must Supply Us With DIMENSION A - OR - DIMENSION B. Please follow the directions in the pictures. PLEASE Enter this information...

Dual Taper, Pricing Good For Shafts Up To 5'

You Must Supply Us With DIMENSION A - OR - DIMENSION B. Please follow the directions in the pictures.

PLEASE Enter this information ABOVE where it says SHAFT LENGTH MEASUREMENT.

Right Hand - HURTH STYLE COUPLER

This is a special order, custom cut drive shaft made to your specifications. No returns are accepted on this drive shaft system.

Fits 2003 Up MasterCraft with Splined propeller and V-Drive with inverted coupler for HSW 630 VI & ZF 63 IV Transmissions.

Includes, keys, nuts, cotter pins and set screws

System Drive Shaft. The patented A.R.E. System is a double-taper drive shaft and coupling setup designed to greatly reduce the time and effort needed to remove and replace drive shafts. When used with tools developed by A.R.E. for drive train maintenance, the System typically cuts installation time in half.

System drive shafts are made of the finest shaft materials and are individually inspected to ensure the tapers have less than .003" T.I.R. run-out and the coupling face run-out is within .002" T.I.R. The shafts are straightened to less than .002" on 42" centers, producing a complete assembly far exceeding industry standards.

This dual taper shaft system includes everything except the coupler retaining nut socket Item SYSSOCKET106.

If the shaft is STILL IN THE BOAT, just measure from the coupler face to the tip of the shaft on the prop side.