Shaft & Strut Hardware

Inboard Drive Drive Shaft & Strut Hardware.

Marine struts help minimize your inboard shaft movement and water flow disturbance on your watercraft. Marine inboard propeller shafts transfer the engine's torque to the propeller. Both of these are very critical components designed for the propellers on recreational and pleasure powerboats. At My Inboard Marine, we have a large selection of propeller strut and shaft hardware for a variety of inboard boat models.

My Inboard Marine is committed to helping you keep your boat running at its finest, with the very best inboard products on the market. For more information about inboard marine props, shafts and struts, and to find the right products for inboard needs, please contact us today!

Click HERE to go back to Underwater Gear

 

Prop Nut Brass Castle Nut For 1" or 1-1/8" Shafts Slotted Castle Nut
$19.00 $21.99
Inboard Castle Nut - Fits 1" or 1-1/8" shafts. 3/4-10 thread Fits 1" or 1-1/8" shafts. This castle nut can be replaced with a Nylock...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
$145.09 $218.90
1-1/8" I.D. x 1-3/8" O.D. MARINE HARDWARE OEM STRUT BEARING SET Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the...
Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3 Strut Bushing Set 1 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings SB1.0X1.3
$139.00 $150.00
STRUT BEARING SET 1" I.D. x 1-3/8" O.D. Fits some Malibus, Mastercrafts, Ski Brendella, Ski Centurion's before 1992 when they went to the 1-1/8" shafts....
COUPLING BOLT HARDWARE SET FOR A.R.E. DRIVE SHAFT SYSTEM USED ON THE 4 INCH COUPLER
$16.95 $18.99
Complete Set of Hardware for your 4" INCH A.R.E. Drive Shaft System Coupling COMPLETE SET of 4 Bolts for your coupler Bolt Size: 3/8" x...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
$47.00 $60.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - 1-1/8 Inch Shafts Shaft Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 3.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - 1-1/8 Inch Shafts Shaft Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 2.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1" - 1 Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 2.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - 1-1/8 Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-3/8" Bearing Length: 2.00" Each Set: Comes with...
Prop Nut Brass Castle Nut For 1-1/4" Shafts Slotted Castle Nut Prop Nut Brass Castle Nut For 1-1/4" Shafts Slotted Castle Nut
$23.37 $45.28
Inboard Castle Nut - Fits 1-1/4" shafts. 7/8-9 thread
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415 Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
$38.95 $42.95
2-1/4" Rudder & Shaft Stuffing Box Wrench for Inboards, made out of 3/8" thick Billet Aluminum | Black Anodized This is a Stub Wrench for...
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/2"
$57.80 $68.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2025 Vesconite...
Castle Nut Brass For 1" and 1-1/8" Inboard Shafts Slotted Castle Nut PNUTFULL-1.000-BCN
$39.29 $45.83
Inboard Castle Nut - Fits 1" and 1-1/8" shafts. 3/4-10 thread - Low Profile Machined grooves to accept all cotter pin sizes. CNC Class 3...
Shaft Log 15-16 Degree Aluminum OEM Marine Hardware - SHLG16150A
$127.66 $140.84
15-16 Degree Shaft Log By Marine Hardware® Note: When the shaft log is connected to the stuffing box with a rubber hose, the angle can...
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415 Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
$42.95 $52.95
2-1/2" Rudder & Shaft Stuffing Box Wrench for Inboards, made out of 3/8" thick Billet Aluminum | Black Anodized This is a Stub Wrench for...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
$50.00 $63.95
GLIDE® STRUT BEARING | BUSHING SET 1" - 1 Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 3.00" Each Set: Comes with...
Strut Bushing Brass Sleeve Bearing, 1-1/4 x 2 x 5 inch | Duramax BITE
$87.59 $185.68
STRUT BEARING SET 1-1/4" I.D. x 2.00" O.D. X 5" Long 1-1/4 inch x 2 inch x 5 inch brass sleeve bearing provides a wear...
Items 17 to 32 of 50 total