Transmission update kit to replace PCM 40A model 1:23-1 ratio with 80A model on FORD engines and includes all necessary parts for the conversion.

• Conversion kit for updating the PCM 40A transmission to the PCM 80A model for Ford engines
• Conversion kit for updating the PCM 40A transmission to the PCM 80A model for GM engines with the PCM PowerPlus v-drive
• Kit includes 80A transmission RA157027
• The transmission is 1.23:1 reduction ratio with an 8 degree down angle 4 inch diameter output coupling
• Kit also includes a new damper drive plate, transmission cooler and hoses along with all necessary attaching hardware
• No dimensional changes take place with the update
• The original propshaft, coupler and transmission mounts can be reused
• Replaces RA157027 transmission model 40A
  

Brand New PCM 80A transmission kit. This kit replaces the PCM 40A 1.23:1 ratio transmissions using FORD 302/351 5.8L engines.

Kit includes new damper plate, 12" transmission cooler, fittings, lines, bolts and shift cable bracket and has the same dimensions as the original PCM 40A with 9 degree down angle output coupler.

Note the 80A fluid pump is not reversible and will only work with a left hand standard rotation engine!

• THIS KIT IS NON-RETURNABLE UNLESS DEFECTIVE!
• NOTE: This kit only works with LEFT HAND rotation engines.

Engine model. ( Example: PCM 5.7 )

Transmission model on existing transmission. ( Example 1017-004 )

Kit works with LEFT HAND ENGINES ONLY i.e. ( Left Hand Prop on the 1:1 direct drive, and Right Hand Prop on the 1.23:1 gear ).

Photo of the v-drive if there is a v-drive on your setup. Text picture to 803-766-8586 to Donny or you can e-mail to us at donny@myinboardmarine.com

CLICK HERE FOR KIT CONTENTS LIST