PLEASE NOTE - Some products are not immediately available. If your order will be delayed, we will e-mail you or call you and let you know.
E-MAIL US HERE about availability and we will respond quickly! We ship same day if your order was placed by 1:00 PM EST during normal business hours BASED ON AVAILABILITY.
NEXT DAY SHIPPING NOTE - Please see our Shipping Policy SATURDAY OR SUNDAY DELIVERY IS NOT AN OPTION.

Drive Shafts & Accessories

Drive Shafts, Shaft Seals, Strut Bushings/Bearings, Retaining Nut Sockets, Nylock Retaining Nuts, Prop Pullers, Shaft Strut Bearing Pullers.
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1" - One Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 2.00" Each Set: Comes with...
Prop Puller OJ Johnson For 1 Inch  To 1-1/8" Shafts
20%
$140.00 $175.00
The "OJ Prop Puller" Prop Puller for 1" - 1-1/8" Shafts! THIS PRECISION TOOL IS ESSENTIAL TO REMOVE ANY INBOARD PROPELLER WITH EASE. Investment Cast...
The All New OJ Prop Kit  Knocker Just In Case Hard Case With All The Tools 18 Inch The All New OJ Prop Kit  Knocker Just In Case Hard Case With All The Tools 18 Inch
36%
$283.00 $444.00
ALL NEW HARD CASE COMPLETE PROP KIT! - Up To 18" PROPS 18" OJ "JUST IN CASE" HARD CASE - PROP KIT <no-prop - kit-only>...
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5 Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
15%
$145.00 $169.95
STRUT BEARING SET 1" I.D. x 1-1/2" O.D. Fits some of the late model 1970's & 1980's Mastercrafts with the 1:1 Velvet Drive transmission. These...
Bolt Flywheel Damper GM Small And Big Block Engine OEM R009092
55%
$6.24 $13.73
You can use your old bolts. These bolts fit standard thread flywheels  Grade 5 -  3/8 - 1 X 1"  Be sure to make sure...
1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 55.750 Assembled Length 1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 55.750 Assembled Length
26%
$610.00 $828.77
1-1/8" X 5" A.R.E Inboard Shaft System With Inverted 5" Face Diameter Hurth Steel Coupler Dual Taper Shaft length is 52.250 Long Assembled Length with...
1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length 1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length
28%
$659.00 $910.22
Marine Hardware 1-1/4" Custom Prop Shaft & Borg Warner Style Coupler 5 Inch Diameter Works for shaft TIP to TIP Length of 58-3/4 inches. 1-1/4"...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
20%
$159.05 $199.00
1-1/8" I.D. x 1-3/8" O.D. MARINE HARDWARE OEM STRUT BEARING SET Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 2.00" Each Set: Comes with...
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-3/8" Bearing Length: 2.00" Each Set: Comes with...
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000 Glide® Replacement Seal Kit 1-1/4" | OEM GMS-TL-1.250
29%
$35.00 $49.55
Glide® Replacement Seal Kit 1-1/8" Our replacement seal kits are compatible with any Glide Housing with the (6) screw cap. Glide Seal Kit Includes: Seal...
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000 Glide® Replacement Seal Kit 1-1/4" | OEM GMS-TL-1.250
32%
$32.50 $47.50
Glide® Replacement Seal Kit 1" - One Inch Our replacement seal kits are compatible with any Glide Housing with the (6) screw cap. Glide Seal...
Acme Harmonic Prop Puller For <b>2-1/4 - 2-1/2  Inch</b> Shafts 5021 Acme Harmonic Prop Puller For <b>2-1/4 - 2-1/2  Inch</b> Shafts 5021
10%
$212.05 $234.70
By ACME Marine for 2-1/4" - 2-1/2" Shafts. Awesome device that works by simply removing your prop nut, screw the harmonic puller onto the shaft and...
Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts
11%
$77.95 $87.99
All Brass Prop Knocker - Fits 1-3/8"Shafts 1-8 threads CNC Machined from All Brass with perfection. Threads onto the shaft, excellent for splined shafts. Simply screw...
Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts
17%
$49.95 $59.99
All Brass Prop Knocker - Fits 1" & 1-1/8" Shafts 3/4"-10 threads CNC Machined from All Brass with perfection. Threads onto the shaft, excellent for splined...
Shaft Seal Only OJ 1-1/8 With Snap Ring GBS1125-JP
29%
$34.00 $48.00
Replacement seal for GLIDE GMSS and OJ dripless systems with 1-1/8" shafts. Fits OJ rudder ports original equipment on Mastercrafts 2003 through 2012. This does...
Items 81 to 96 of 205 total