PLEASE NOTE - Some products are not immediately available. If your order will be delayed, we will e-mail you or call you and let you know.
E-MAIL US HERE about availability and we will respond quickly! We ship same day if your order was placed by 1:00 PM EST during normal business hours BASED ON AVAILABILITY.
NEXT DAY SHIPPING NOTE - Please see our Shipping Policy SATURDAY OR SUNDAY DELIVERY IS NOT AN OPTION.
Need Immediate Help? Contact us:
Mon - Thur 9 AM - 5 PM & Friday 8 AM - 2 PM EST sales@myinboardmarine.com
TRY OUR NEW LIVE CHAT BUBBLE BELOW!
803-766-8586
0
0
categories
0

Categories

Drive Shafts & Accessories

Drive Shafts, Shaft Seals, Strut Bushings/Bearings, Retaining Nut Sockets, Nylock Retaining Nuts, Prop Pullers, Shaft Strut Bearing Pullers.
Filter
Sort by
Show
Strut - Sanger 16 Degree 1-1/8 Inch Shaft 6 Hole Pattern - Includes Strut Bearings MH-710-1.12
Strut - Sanger 16 Degree 1 Inch Shaft 6 Hole Pattern - Includes Strut Bearings MH-710-1.00 Strut - Sanger 16 Degree 1 Inch Shaft 6 Hole Pattern - Includes Strut Bearings MH-710-1.00
9%
$594.00 $656.00
Strut - Sanger 16 Degree 1-1/8 Inch Shaft 6 Hole Pattern - Includes Strut Bearings MH-710-1.12
$594.00 $656.00
Fits boats with 1-1/8" driveshaft and 6 bolt mounting pattern16 degree - Sanger Has 6 Mounting Holes and includes brass shelled rubber strut bushings! All...
Shaft Log 15-16 Degree Aluminum OEM Marine Hardware - SHLG16150A
Shaft Log 15-16 Degree Aluminum OEM Marine Hardware - SHLG16150A
9%
$116.05 $128.04
Shaft Log 15-16 Degree Aluminum OEM Marine Hardware - SHLG16150A
$116.05 $128.04
15-16 Degree Shaft Log By Marine Hardware® Note: When the shaft log is connected to the stuffing box with a rubber hose, the angle can...
1" X 5" A.R.E. Inboard Shaft System and Coupler Dual Taper WS2000A
1" X 5" A.R.E. Inboard Shaft System and Coupler 1" X 5" A.R.E. Inboard Shaft System and Coupler
27%
$514.00 $707.00
1" X 5" A.R.E. Inboard Shaft System and Coupler Dual Taper WS2000A
$514.00 $707.00
Dual Taper, Pricing Good For Shafts Up To 5' Fits most boats with a 1:1 transmission Borg Warner Style (72c) and big block engines 454-...
Bolt Flywheel Damper GM Small And Big Block Engine OEM R009092
Bolt Flywheel Damper GM Small And Big Block Engine OEM R009092
55%
$6.24 $13.73
Bolt Flywheel Damper GM Small And Big Block Engine OEM R009092
$6.24 $13.73
You can use your old bolts. These bolts fit standard thread flywheels  Grade 5 -  3/8 - 1 X 1"  Be sure to make sure...
Strut Bearings Set OJ Marine Vesconite 1" I.D. X 1-1/2" O.D. OEM 2025
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/2"
16%
$75.00 $89.00
Strut Bearings Set OJ Marine Vesconite 1" I.D. X 1-1/2" O.D. OEM 2025
$75.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2025 Vesconite...
1-1/8" X 4" A.R.E. Inboard Drive Shaft System Dual Taper WS2050
1-1/8" X 4" A.R.E. Inboard Drive Shaft System Dual Taper 1-1/8" X 4" A.R.E Inboard Shaft System and Coupler
16%
$585.00 $699.00
1-1/8" X 4" A.R.E. Inboard Drive Shaft System Dual Taper WS2050
$585.00 $699.00
Dual Taper, Pricing Good For Shafts Up To 5' Normally fits inboard boats that have a 1:1 transmission Borg Warner Style and a small block...
1-1/8" PSS Shaft Seal Kit 1-1/8" Diameter Drive Shafts Comes With Install Kit
1-1/8" PSS Shaft Seal Kit 1-1/8" Diameter Drive Shafts Comes With Install Kit 1-1/8" PSS Shaft Seal Kit 1-1/8" Diameter Drive Shafts Comes With Install Kit
1%
$472.00 $479.00
1-1/8" PSS Shaft Seal Kit 1-1/8" Diameter Drive Shafts Comes With Install Kit
$472.00 $479.00
Fits all boats with 1-1/8" shaft and 1-3/4 length shaft log.  COMES WITH the quick install kit; Item INSTKIT1.125X.37 Uses a Stainless Steel rotor that slides...
1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length
1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length 1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length
28%
$659.00 $910.22
1-1/4" Custom Inboard Prop Shaft System With Borg Warner Style 5" Coupler Dual Taper 58.75 Inch Assembled Length
$659.00 $910.22
Marine Hardware 1-1/4" Custom Prop Shaft & Borg Warner Style Coupler 5 Inch Diameter Works for shaft TIP to TIP Length of 58-3/4 inches. 1-1/4"...
Ring Nut | ZF Industries 637513037
Ring Nut | ZF Industries 637513037 Ring Nut | ZF Industries 637513037
10%
$29.50 $32.95
Ring Nut | ZF Industries 637513037
$29.50 $32.95
Ring Nut OEM  Replaces Hurth 0637513037, 489305
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415 Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
9%
$38.95 $42.95
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
$38.95 $42.95
2-1/4" Rudder & Shaft Stuffing Box Wrench for Inboards, made out of 3/8" thick Billet Aluminum | Black Anodized This is a Stub Wrench for...
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter| 1-1/2 Outside Diameter OEM 1.125X1.500X3.000
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
22%
$47.00 $60.00
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter| 1-1/2 Outside Diameter OEM 1.125X1.500X3.000
$47.00 $60.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 3.00" Each Set: Comes with...
Glide Strut Bearing Set | Bushing 1" Shaft Diameter OEM 1.000X1.250X2.000
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
Glide Strut Bearing Set | Bushing 1" Shaft Diameter OEM 1.000X1.250X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1" - One Inch Shafts Shaft Size-Diameter: 1.00" Strut Inside Diameter: 1-1/4" Bearing Length: 2.00" Each Set: Comes with...
Glide® Replacement Seal Kit 1-1/8" | OEM GMS-TL-1.125
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000 Glide® Replacement Seal Kit 1-1/4" | OEM GMS-TL-1.250
29%
$35.00 $49.55
Glide® Replacement Seal Kit 1-1/8" | OEM GMS-TL-1.125
$35.00 $49.55
Glide® Replacement Seal Kit 1-1/8" Our replacement seal kits are compatible with any Glide Housing with the (6) screw cap. Glide Seal Kit Includes: Seal...
Prop Puller OJ Johnson For 1" Inch To 1-1/8" Shafts
Prop Puller OJ Johnson For 1 Inch To 1-1/8" Shafts
20%
$140.00 $175.00
Prop Puller OJ Johnson For 1" Inch To 1-1/8" Shafts
$140.00 $175.00
The "OJ Prop Puller" Prop Puller for 1" - 1-1/8" Shafts! THIS PRECISION TOOL IS ESSENTIAL TO REMOVE ANY INBOARD PROPELLER WITH EASE. Investment Cast...
Castle Nut Brass Low Profile For 1" and 1-1/8" Inboard Shafts Slotted Castle Nut PNUTFULL-1.000-BCN
Castle Nut Brass For 1" and 1-1/8" Inboard Shafts Slotted Castle Nut PNUTFULL-1.000-BCN
35%
$29.95 $45.80
Castle Nut Brass Low Profile For 1" and 1-1/8" Inboard Shafts Slotted Castle Nut PNUTFULL-1.000-BCN
$29.95 $45.80
Inboard Castle Nut - Fits 1" and 1-1/8" shafts. 3/4-10 thread - Low Profile Machined grooves to accept all cotter pin sizes. CNC Class 3...
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5 Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
15%
$145.00 $169.95
Strut Bushing Set 1 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.0X1.5
$145.00 $169.95
STRUT BEARING SET 1" I.D. x 1-1/2" O.D. Fits some of the late model 1970's & 1980's Mastercrafts with the 1:1 Velvet Drive transmission. These...
Strut - 16 Degree Centruion 1998 & Up - 1 Inch Shaft 6 Hole Bolt Pattern STSL-16 Includes Strut Bearings MHSTRUTSTSL16-10
Strut - 16 Degree Centruion 1998 & Up - 1 Inch Shaft 6 Hole Bolt Pattern STSL-16 Includes Strut Bearings MHSTRUTSTSL16-10
28%
$576.54 $798.69
Strut - 16 Degree Centruion 1998 & Up - 1 Inch Shaft 6 Hole Bolt Pattern STSL-16 Includes Strut Bearings MHSTRUTSTSL16-10
$576.54 $798.69
Fits boats with 1" (ONE INCH) driveshaft and 6 bolt mounting pattern 16 degree - 1" Shaft Has 6 Mounting Holes and includes brass shelled...
1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 50.00" Assembled Length
1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 55.750 Assembled Length 1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 55.750 Assembled Length
26%
$610.00 $828.77
1-1/8" X 5" Inboard Shaft System With Inverted Hurth Steel Coupler Dual Taper 50.00" Assembled Length
$610.00 $828.77
1-1/8" X 5" A.R.E Inboard Shaft System With Inverted 5" Face Diameter Hurth Steel Coupler Dual Taper Shaft length is 52.250 Long Assembled Length with...
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
20%
$159.05 $199.00
Strut Bushing Set 1-1/8 Inch I.D. X 1-3/8 Inch O.D. Brass Bearings OEM Marine Hardware
$159.05 $199.00
1-1/8" I.D. x 1-3/8" O.D. MARINE HARDWARE OEM STRUT BEARING SET Fits most Malibu 1993 and up with 1-1/8" drive shafts, direct drive and the...
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter| 1-1/2 Outside Diameter OEM 1.125X1.500X2.000
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter| 1-1/2 Outside Diameter OEM 1.125X1.500X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-1/2" Bearing Length: 2.00" Each Set: Comes with...
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter | 1-3/8 Outside Diameter OEM 1.125X1.375X2.000
Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000 Glide Strut Bearing | Bushing 1-1/4" Shaft Diameter OEM 1.250X1.500X2.000
21%
$45.00 $57.00
Glide Strut Bearing Set | Bushing 1-1/8" Shaft Diameter | 1-3/8 Outside Diameter OEM 1.125X1.375X2.000
$45.00 $57.00
GLIDE® STRUT BEARING | BUSHING SET 1-1/8" - One Inch Shafts Shaft Size-Diameter: 1-1/8" Strut Inside Diameter: 1-3/8" Bearing Length: 2.00" Each Set: Comes with...
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000 Glide® Replacement Seal Kit 1-1/4" | OEM GMS-TL-1.250
32%
$32.50 $47.50
Glide® Replacement Seal Kit 1" | One Inch OEM GMS-TL-1.000
$32.50 $47.50
Glide® Replacement Seal Kit 1" - One Inch Our replacement seal kits are compatible with any Glide Housing with the (6) screw cap. Glide Seal...
Acme Harmonic Prop Puller For 2-1/4 - 2-1/2 Inch Shafts 5021
Acme Harmonic Prop Puller For <b>2-1/4 - 2-1/2 Inch</b> Shafts 5021 Acme Harmonic Prop Puller For <b>2-1/4 - 2-1/2 Inch</b> Shafts 5021
10%
$212.05 $234.70
Acme Harmonic Prop Puller For 2-1/4 - 2-1/2 Inch Shafts 5021
$212.05 $234.70
By ACME Marine for 2-1/4" - 2-1/2" Shafts. Awesome device that works by simply removing your prop nut, screw the harmonic puller onto the shaft and...
Prop Knocker All Brass Harmonic Prop Puller - For 1-3/8" Shafts KNOCKER138
Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts Prop Knocker All Brass Harmonic Prop Puller - For 1" And 1-1/8" Shafts
11%
$77.95 $87.99
Prop Knocker All Brass Harmonic Prop Puller - For 1-3/8" Shafts KNOCKER138
$77.95 $87.99
All Brass Prop Knocker - Fits 1-3/8"Shafts 1-8 threads CNC Machined from All Brass with perfection. Threads onto the shaft, excellent for splined shafts. Simply screw...
Items 73 to 96 of 205 total