PLEASE NOTE - Some products are not immediately available. If your order will be delayed, we will e-mail you or call you and let you know.
E-MAIL US HERE about availability and we will respond quickly! We ship same day if your order was placed by 1:00 PM EST during normal business hours BASED ON AVAILABILITY.
NEXT DAY SHIPPING NOTE - Please see our Shipping Policy SATURDAY OR SUNDAY DELIVERY IS NOT AN OPTION.

Drive Shafts & Accessories

Drive Shafts, Shaft Seals, Strut Bushings/Bearings, Retaining Nut Sockets, Nylock Retaining Nuts, Prop Pullers, Shaft Strut Bearing Pullers.
Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415 Packing Nut Wrench For Rudder | Shaft Stuffing Box 2-1/4" OEM SPW-415
10%
$34.95 $38.95
Shaft Packing Wrench for Inboards, made out of 3/8" thick Billet Aluminum. 1-7/8" This is a Stub Wrench for the hard to reach 1.875" Stuffing Box...
Strut Bushing Set 1-1/8 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5 Strut Bushing Set 1-1/8 Inch I.D. X 1-1/2 Inch O.D. Brass Bearings SB1.1X1.5
14%
$155.00 $179.95
STRUT BEARING SET 1-1/8" I.D. x 1-1/2" O.D. Fits most Mastercraft with Powerslot 1.5"1 ratio transmission. These bearings used to be one long piece but are...
Nut For Velvet Drive 71C and 72C Direct Drive 1 to 1 Ratio Transmissions R017002 VD-4775L
38%
$22.33 $36.02
Output Shaft Nut OEM by Velvet Drive Brand Output Shaft Nut - 4" Outside Diameter Couplers For Velvet Drive 71C and 72C direct drive transmissions...
Strut Bearings Set Glide Marine Vesconite Hilube 1" X 1-1/4"
12%
$78.00 $89.00
VESCONITE STRUT BEARING SET 1" I.D. x 1-1/4" O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2026 -...
Packing Nut Wrench 2" For 2 Inch For Hard To Reach 2" Stuffing Box
10%
$36.95 $40.95
Shaft Packing Wrench for Inboards, made out of 3/8" thick Billet Aluminum. This is a Stub Wrench for the hard to reach 2" Stuffing Box...
Adaptor For Shaft Puller For Pulling 1-1/4 Inch Shafts For The A.R.E. Slide Hammer Puller
14%
$55.00 $64.00
1-1/4 Inch Adaptor for the A.R.E. Shaft/Strut Bearing Puller This adaptor will allow the A.R.E. shaft removal tool to be used on 1-1/4" shafts more...
1" X 4" A.R.E. Inboard Shaft System and Coupler SHAFT SYSTEM A.R.E. FOR 1 INCH X 5 INCH BORG WARNER STYLE COUPLER
16%
$585.00 $699.00
Dual Taper, Pricing Good For Shafts Up To 5' Fits most ski boats with 1:1 transmission Borg Warner Style (71c) and small block engines 5.8,...
Strut Bearings Set Glide Marine Vesconite Hilube 1-1/8" X 1-1/2"
20%
$79.00 $99.00
VESCONITE STRUT BEARING SET 1-1/8 I.D. x 1-1/2 O.D. Each of the bearings are 2" in length and are sold by the pair. OJ-2024 Vesconite...
Flex Gland Seal and Housing Only - Fits The <b>1"</b> Flex Gland Dripless Shaft Seal by Johnson Propellers Flex Gland Seal and Housing Only - Fits The <b>1"</b> Flex Gland Dripless Shaft Seal by Johnson Propellers
12%
$38.72 $44.00
Johnson Propellers Dripless Shaft Replacement Seal and Housing Only For 1" drive shafts. Replaces your SEAL and HOUSING in your current 1" Flex Gland System! If...
Strut - Tige 16 Degree 1-1/8 Inch Shaft 6 Hole Pattern - Includes Strut Bearings SEF-1012-16
6%
$725.00 $769.69
Fits boats with 1-1/8" driveshaft and 6 bolt mounting pattern16 degree Has 6 Mounting Holes and includes brass shelled rubber strut bushings! All of our...
Flex Gland Seal and Housing Only - Fits The <b>1-1/8"</b> Flex Gland Dripless Shaft Seal by Johnson Propellers Flex Gland Seal and Housing Only - Fits The <b>1-1/8"</b> Flex Gland Dripless Shaft Seal by Johnson Propellers
12%
$38.72 $44.00
Johnson Propellers Dripless Shaft Replacement Seal and Housing Only For 1-1/8" drive shafts. Replaces your SEAL and HOUSING in your current 1-1/8" Flex Gland System! If...
Nylock Prop Nut Brass For 1" Or 1-1/8" Or 1-1/4" Shafts With Key And Cotter Pin ACME 5008
29%
$29.00 $40.99
Fits 1" - 1-1/8" Shafts ACME 5008 ACME Prop Nut Kits include one nylon lock nut, cotter pin, and key.
Prop Knocker All Brass Harmonic Prop Puller - For 1-3/4" Shafts KNOCKER134 Prop Knocker All Brass Harmonic Prop Puller - For 1-3/4" Shafts KNOCKER134
7%
$133.95 $143.99
All Brass Prop Knocker - Fits 1-3/4"Shafts 1-1/4 - 7 threads CNC Machined from All Brass with perfection. Threads onto the shaft, excellent for splined shafts....
Bolts For Strut - 3/8" - 16 x 3" Stainless Steel Fits All Inboard Struts Bolts For Strut - 3/8" - 16 x 3" Stainless Steel Fits All Inboard Struts
19%
$13.00 $16.00
Fits Most Inboard Struts - 18/8 Stainless Steel -  * SOLD EACH - SOLD EACH 3/8" Diameter 16 Pitch 3" Long Includes: Flat top hex...
Output Shaft Nut Velvet Drive OEM ALTO-023320 Output Shaft Nut Velvet Drive OEM ALTO-023320
14%
$22.99 $26.76
Output Shaft Nut OEM Velvet Drive transmission out flange/coupling nylock retaining nut Nut includes built in flange washer One time use requires replacement after installation...
Woodruff Key Brass For Keyway Prop - Shaft 1/4" X 1/4" X 1 1/2" Woodruff Key Brass For Keyway Prop - Shaft 1/4" X 1/4" X 1 1/2" ACME BRAND
16%
$10.95 $12.99
Woodruff Key Brass For Keyway Prop - Shaft 1/4" X 1/4" X 1 1/2"    
Items 17 to 32 of 205 total