SHAFT SYSTEM A.R.E. FOR 1-1/8 INCH X 3-1/2 INCH WALTERS V-DRIVE STYLE COUPLER
Dual Taper - Both Ends
51" Overall Tip To Tip Length
3-1/2" Walter V-Drive Coupling Kit Complete
Includes, keys, nuts and set screw
System Drive Shaft. The patented A.R.E. System is a double-taper drive shaft and coupling setup designed to greatly reduce the time and effort needed to remove and replace drive shafts. When used with tools developed by A.R.E. for drive train maintenance, the System typically cuts installation time in half.
System drive shafts are made of the finest shaft materials and are individually inspected to ensure the tapers have less than .003" T.I.R. run-out and the coupling face run-out is within .002" T.I.R. The shafts are straightened to less than .002" on 42" centers, producing a complete assembly far exceeding industry standards.
This dual taper shaft system includes everything except the coupler retaining nut socket Item SYSSOCKET106.
If the shaft is missing measure from the transmission coupling face to the rear of the strut then add 4.6" for replacement length.
Click HERE for installation instructions in PDF.